Payment & Shipping Terms:
PF680 Waterproof Weather Resistant Polyaspartic coating
PF680 Waterproof Polyaspartic Topcoat consists of Polyaspartic resin, non-yellowing HDI trimer isocyanate, additives and small amount of solvent.
■ Suit for high build application, one time film thickness more than 300μm
■ Excellent weather resistance, color stable in 20 years
■ Good adhesion to epoxy primer and Polyaspartic topcoat
■ Excellent impact resistance and break elongation
■ Convenient application, fast drying
Designed application: for waterproof and anti-corrosion of concrete substrate(basement,bridge,roof,warehouse etc), for buried steel structure waterproof and anti-corrosion of outer layer
Main performance index
|Solid content||≥80 %(Part A and Part B mixed)|
|Drying time||Tack free time ≤ 40 min hard dry 5h(25℃±2)|
|Available working time||40~60min|
|Adhesion to primer(MPa)||≥2.5MPa|
|Low temperature flexibility||≤-35℃|
|Salt resistance 240h(3%NaCl)||Perfect film, no bubble|
|Alkali resistance 240h(5%NaOH solution)||Perfect film, no bubble|
|Acid resistance 240h(5%H2SO4)||Perfect film, no bubble|
|Waterproof property 30 days(25℃)||Perfect film, no bubble|
Color: Clear transparent
Solid content by weight:≥80%(Part A and Part B mixed)
Flash point: 30±2℃
Viscosity: 800±200CPS(25℃,Part A and Part B mixed)
Gloss: High gloss
Film thickness: Dry film:300－400 um wet film:500－600μm
Theoretical coat efficiency:theoretical value :1.5 sq.m/Kg/500μm
Actual value:related to surface treatment,outside environment,application method and variety of factors.
Airless spray:Part A:Part B:Diluent＝1:1:moderate(by weight,mix it thoroughly before applying)
Brush or scrape : Part A:Part B:Diluent＝1:1: moderate(by weight,mix it thoroughly before applying)
Available working time:
|Potlife after mixing(min)||90~120||80~90||50~70||40~60|
Ambient temperature: -15℃-30℃,Ambient moisture:≤85%
Substrate temperature: must 3℃ higher than dew point
|Airless spray,Brush and scrape(recommend)|
|Airless spray(2 components)|
|Spray nozzle size||0.021－0.023|
Cleaning agent:Standard Polyaspartic diluent.
remark:if use air spray or brush and roller , please consult our engineer prior to application.
Drying time and recoat window:
|Finger press dry(hrs)||24||10||5||2||1.5|
Statistics above is only for guidance, actual drying time and recoat window could be changeable, depends on film thickness, ventilation, humidity, undercoat, loading demand and mechanical strength.
Adapted undercoat:epoxy penetrative primer, Polyaspartic coating, or refer to our recommended match
Adapted topcoat:Polyaspartic coating
l Remove salt and other water soluble dirt with clear water
l Remove grease with moderate cleaning agent and degreaser
l Make surface clean and dry before application
l Pay attention to recoat window on primer
Shelf life:Part A:1 year Part B:1 year
Storage temperature: 0℃－30℃
Part A:20KG Pail
Part B:10KG Pail
l Avoid touching skin or eyes.
l In case of skin contact, wash affected area with moderate cleaning agent .In case of eye contact, wash with plenty of water and go to hospital immediately.
l Ensure good ventilation.
l Coating contains flammable matter. Keep it away from spark and smoking around construction area is forbidden.
l Please observe all health&safety regulation.
the information in product specification is totally base on our acknowledge in lab and practice. Because the usage of product usually is out of our control, we only provide assurance of our product quality. We reserve the rights of modifying this specification without prior notice.
Query mail: firstname.lastname@example.org