Payment & Shipping Terms:
PFS100 Spraying Polyurea
PFS100 spraying polyurea is a kind of high performance material with 100% solid content, two components, rapid curing and live spraying. Component A is isocyanate prepolymer. Component B is composed of amino-terminated polyether, polyether polyol, chain extender and pigment. It has the advantages of high strength, good performance and quick construction.
PFS100 has better anti-aging and anti-corrosion performance. PDS100 spraying polyurea can be used with higher quality requirements.
|Impermeable||0.4MPa,60min no imperviousness|
|Water resistance(30d)||No rust, no blister, no drop|
|Liquid Resistance Medium||No rust, no blister, no drop|
|QUVa(2000h)||No rust, no blister, no drop|
1) Construction environment requirements: in order to achieve the best coating effect on-site requirements for ventilation, environmental temperature should not be lower than 10℃, substrate temperature is higher than 5℃, air humidity is less than 80%.
1) The manual polyurea PDS100 is for repair for the place where there are leak points and pinholes
2) Regarding to small area of coating damage or defect, Remove the damage and non-solidified coating through sandblasting or grinding, the grinding range should be extended from the coating damage to the surrounding 5-10 cm, clean after brushing the adhesive between the coatings, and then repair by the concrete-specific manual polyurea PDS100.
3) Large area of coating damage or defect, repair according to the 2) method to brush the adhesive between the coatings by spraying.
Packaging: spray polyurea material for two components, A component 220KG/ barrel, B component 210KG/ barrel.
The standard color is gray,other colors can be provided according to user's requirements.
Query mail: email@example.com
Contact Person: Ms. Laura Yi